EasyManua.ls Logo

Segway SGW570F-A3 - Page 101

Segway SGW570F-A3
201 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
95
OPERATION
battery is charging;
When the winch is working, the current is large, so
you must start the vehicle and step on the accelerator
lightly to avoid damage to the battery;
The winch rope and the vehicle should be in a straight
line. Too big an angle will change, The direction of the
pulling force, thereby damaging the rope;
If severe noise or vibration occurs during the use of the
winch, it must be stopped immediately
When the winch is not used, please remove the
controller;
!
WARNING
When releasing or retrieving the winch rope, both ends of
the rope must be left with sufficient
length to prevent the rope from being over-rolled in or
out. When the rope is retrieving, please maintain a certain
tension so that the wire can be retracted smoothly and
can be wound tightly during retrieving.

Table of Contents

Related product manuals