Seltron AHC40 - Step 3 - Setup of Heating Curve Slope; Step 4 - Selection of Opening Direction of the Mixing Valve

English 7
STEP 4 – SELECTION OF OPENING DIRECTION OF THE MIXING VALVE
Select the right direction of opening the mixing valve.
Move between the directions with the keys and .
Conrm the selected direction with the key .
Conrm the correct direction by pressing .
If the wrong direction has been selected in error, return
to direction re-selection by pressing .
Opening direction of the mixing valve can be changed with the S1.4 service
parameter later on.
STEP 3 – SETUP OF HEATING CURVE SLOPE
Setup the heating curve slope. Change the value with
the keys and .
Conrm the selected value by pressing .
Conrm the heating curve slope with the key .
If the wrong value has been selected in error, return to
slope re-selection by pressing .
The heating curve slope can be changed with the P2.1 user parameter later
on.