conversation. If the pairing process is not completed within one minute, the 10R will return to stand-by mode.
Pairing A & B
4. You can make other pairing between headsets A and C, and between headsets A and D by following the same procedure
as above.
5. The intercom pairing queue is ‘Last-Come, First-Served’. If a headset has multiple paired headsets for intercom
conversations, the last paired headset is set as first intercom friend. The previous intercom friend becomes second
intercom friend, and third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the first intercom friend of headset A. Headset C is the
second intercom friend of headset A, and headset B is the third intercom friend of headset A.
5.4.2 Pairing with Other Sena Headset Models for Intercom Conversation
The 10R can be paired with all other Sena headset models such as the 20S, SMH10 and the SMH5 for intercom conversation.
Please follow the same procedure as above to pair with these headset models.
Note:
The SMH5 cannot participate in three-way or four-way conference intercom with the 10R. The SMH5 has a limited capability
of having two-way intercom with other Sena headsets.
Press the Joystick for 5 seconds
Press the (-) Button for 12 seconds
Second Mobile
Phone Pairing
Press the Front Button for 5 seconds
Press the (-) Button for 12 seconds
Tap the (+) Button three times
Press the Joystick for 5 seconds
Press the (-) Button for 12 seconds
Press the Joystick for 5 seconds
Press the (-) Button for 12 seconds