Sena 10R User Manual

Note:
1. Make sure that you connect the mobile phone and the headset to use the speed dial function.
2. You need to assign speed dial numbers before using the speed dial (please refer to section 13.1, “Assigning Speed Dial”).
Function
Handlebar Remote
Headset
Answer
Tap the Rear Button or the Front
Button
Tap the Center Button
End
Tap the Rear Button or the Front
Button for 2 seconds
Press the Center Button for 2
seconds
Reject
Press the Front Button for 2 seconds
Press the Center Button for 2
seconds
Speed Dial
Double tap the Rear Button
Press the (+) Button for 3 seconds
Voice Dialer
Tap the Rear Button
Press the Center Button for 3
seconds
Button Operation Table for Mobile Phone Call Making and Answering
6.3 GPS Navigation
If you pair a Bluetooth GPS to the 10R as described in section 5.2, “Second Mobile Phone Pairing”, you can listen to GPS
instructions wirelessly. Move the Joystick up or down to adjust volume. The GPS voice instruction interrupts intercom
conversation but it is automatically reestablished after the GPS voice instruction ends.
6.4 Sena SR10, Two-Way Radio Adapter
You can use a two-way radio and the 10R Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Two-way
Radio Adapter (please refer to section 5.2, “Second Mobile Phone Pairing”). Incoming audio from the two-way radio will not
interrupt an intercom conversation but is heard in the background. This is useful when you have an intercom conversation
with a passenger on the back seat and use a two-way radio for group communication with other motorcycle riders.

Sena 10R Specifications

General

Bluetooth	Bluetooth 4.1
Talk time	10 hours
Operating temperature	-10°C to 55°C (14°F to 131°F)
Bluetooth Profiles	HFP, HSP, A2DP, AVRCP
Battery Life	10 hours talk time