13.5 Assigning Speed Dial
1. To assign a phone number as a speed dial, tap the (+) Button or the (-) Button until you hear a voice prompt, “Speed dial”.
2. Tap the Center Button, and you will hear a voice prompt, “Speed dial one” and “Phone connected”.
3. Tap the (+) Button or the (-) Button to select one of three speed dial numbers and you hear a voice prompt, “Speed dial
(#)”.
4. Call a phone number you want to assign and you will hear a voice prompt, “Save speed dial (#)”. The phone number is
automatically assigned to the selected speed dial number. Then the phone call will hang up before being connected.
5. To exit the menu, tap the (+) Button or the (-) Button until you hear a voice prompt, “Cancel”, and tap the Center Button to
confirm. You will then hear a voice prompt, “Cancel”. If no button is pressed within 1 minute, the 10R will exit the
configuration menu and go back to stand-by mode.
Note:
1. After assigning a phone number to one of three speed dials, you can continually assign another phone number to the rest
of two speed dials.
2. You can also assign phone numbers for speed dialing by using the Sena Device Manager software or the Sena
Smartphone App. Please visit the Sena Bluetooth website at www.sena.com for more information.
13.6 Enabling/Disabling Audio Boost
Enabling Audio Boost increases the overall maximum volume. Disabling Audio Boost reduces the overall maximum volume,
but delivers more balanced sound.
13.7 Enabling/Disabling Voice Activated Phone Answering
If this feature is enabled, you can answer incoming calls by voice. When you hear a ringtone for an incoming call, you can
answer the phone by saying a word such as “Hello” loudly or by blowing air into the microphone. VOX Phone is temporarily
To Next Page
Loading...
Need help?
General
