Sena 10R User Manual

- Voice prompts for configuration setting menu
- Voice prompts for battery level indicator
- Voice prompts for speed dial
- Voice prompts for FM radio functions
13.11 Enabling/Disabling RDS AF
Voice Prompt
“RDS AF setting”
Factory Default
Enable
Enable/Disable
Tap the Center Button
RDS AF allows a receiver to re-tune to the second frequency location when the first signal becomes too weak. With RDS AF
enabled on the receiver, a radio station with more than one frequency can be used.
13.12 Enabling/Disabling Sidetone
Voice Prompt
“Sidetone”
Factory Default
Disable
Enable/Disable
Tap the Center Button
Sidetone is audible feedback of your own voice. It helps you to naturally speak at the correct level according to varying helmet
noise conditions. If this feature is enabled, you can hear what you are speaking during an intercom conversation or a phone
call.
13.13 Enabling/Disabling Advanced Noise Control™
Voice Prompt
“Noise control”
Factory Default
Enable
Enable/Disable
Tap the Center Button
When Advanced Noise Control is enabled, the background noise is reduced during an intercom conversation. When it is
disabled, the background noise is mixed with your voice during intercom.
Note:
If you use your 10R with the Bluetooth Audio Pack for GoPro, you can enable or disable this feature only during Normal Audio
Recording Mode. This feature is automatically disabled while in Ultra HD (UHD) Audio Mode.
13.14 Delete All Bluetooth Pairing Information

Sena 10R Specifications

General

Bluetooth	Bluetooth 4.1
Talk time	10 hours
Operating temperature	-10°C to 55°C (14°F to 131°F)
Bluetooth Profiles	HFP, HSP, A2DP, AVRCP
Battery Life	10 hours talk time