Sena 10R User Manual

Please note that in this case, the new participant (D) is an intercom friend of (C), not of you (A).
8.3.2 Ending Four-way Intercom
As same in the case of three-way intercom, you can completely get out of the four-way conference intercom or just
disconnect a single intercom connection.
1. Press the Front Button for 1 second until you hear a beep to terminate four-way conference intercom. It terminates the
intercom connections between you (A), and your intercom friends (B) and (C).
2. Tap or double tap the Front Button to disconnect the intercom connection with one of the two intercom friends accordingly.
However, when you disconnect the second friend (C) by double tapping the Front Button, you will be disconnected with the
third participant (D) as well. This is because the third participant (D) is connected with you via the second friend (C).
Front Button Operation
Result
Press for 1”
Disconnect (B), (C) & (D)
Single tap
Disconnect (B)
Double tap
Disconnect (C) & (D)
End Four-way Intercom
Function
Handlebar Remote
Headset
Call first
intercom friend
Tap the Front Button
Tap the Center Button
Call second
intercom friend
Double tap the Front Button
Double tap the Center Button
Call third
intercom friend
Triple tap the Front Button
Triple tap the Center Button
End two-way
intercom
Tap the Front Button
Tap the Center Button
End all
intercoms
Press the Front Button for 1 second
Press the Center Button for 1
second
Button Operation Table for Intercom

Sena 10R Specifications

General

Bluetooth	Bluetooth 4.1
Talk time	10 hours
Operating temperature	-10°C to 55°C (14°F to 131°F)
Bluetooth Profiles	HFP, HSP, A2DP, AVRCP
Battery Life	10 hours talk time