6 MOBILE PHONE, GPS, SR10
6.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Rear Button or the Front Button to answer the call.
2. You can also answer the incoming call by loudly speaking any word of your choice if Voice Activated Phone Answering
(VOX Phone) is enabled, unless you are connected to intercom.
3. To end a call, tap the Rear Button or press the Front Button for 2 seconds until you hear a mid-tone single beep, or wait for
the called person to end the call.
4. To reject a call, press the Front Button for 2 seconds until you hear a beep while the phone is ringing.
5. There are several ways to make a phone call:
- Enter numbers on your mobile phone’s keypad and make a call. Then the call is automatically transferred to the headset.
- Tap the Rear Button in stand-by mode to activate the voice dialer of your mobile phone. For this, the voice dialing function
must be available on the mobile phone. Refer to your mobile phone manual for further instruction.
Note:
1. If you have two phones connected to your headset and you have an incoming call from the second phone during the call of
the first phone, then you may still receive the call from the second phone. In this case, the call from the first phone is on
waiting mode. If you end a call, then it will automatically guide you to the first phone call.
2. If you have a mobile phone and a GPS connected to your headset, you may not be able to listen to the GPS voice
instruction during the phone call.
6.2 Speed Dialing
You can quickly make a phone call by using the voice speed dial menu.
1. To enter into the voice speed dial menu, double tap the Rear Button and you will hear a mid-toned single beep and a voice
prompt, “Speed dial”.
2. Tap the (+) Button or the (-) Button to navigate between the menus. You will hear voice prompts for each menu item.
3. Tap the Rear Button to select a voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
(4) Speed dial 3
(5) Cancel
4. After selecting the last number redial menu, you will hear a voice prompt, “Last number redial”. Then, to redial the last
phone call number, tap the Rear Button.
5. To call one of the speed dials, tap the (+) Button or the (-) Button to navigate between the menus until you hear a voice
prompt, “Speed dial (#)”. Then, tap the Rear Button.
6. If you want to exit the speed dial immediately, tap the (+) Button or the (-) Button until you hear voice prompt, “Cancel”,
and tap the Rear Button. If you do not press any button within 15 seconds, the 10R will exit the voice speed dial menu and go
back to stand-by mode.
To Next Page
Loading...
Need help?
General
