Sena 20S - Delete All Bluetooth Pairing Information; Remote Control Pairing; Universal Intercom Pairing

20S
49
English
21.15 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Execute Tap the Phone Button
To delete all Bluetooth pairing information of the 20S, rotate the Jog
Dial until you hear a voice prompt saying “Delete all pairings”, and
TAPTHE0HONE"UTTONTOCONlRM4APPINGTHE*OG$IALISNOTAVAILABLE
for this setting.
21.16 Remote Control Pairing
Voice Prompt
“Remote control pairing”
Factory Default N/A
Execute Tap the Phone Button
To enter into Remote Control Pairing mode, rotate the Jog Dial until
you hear a voice prompt, “Remote control pairing”. Then press the
Phone Button to enter into Remote Control Pairing mode. The headset
WILL AUTOMATICALLY EXIT FROM THE CONlGURATION MENU 0LEASE REFER TO
section 19 for details on remote control.
21.17 Universal Intercom Pairing
Voice Prompt
“Universal intercom pairing”
Factory Default N/A
Execute Tap the Phone Button
To enter into Universal Intercom Pairing mode, rotate the Jog Dial until
you hear a voice prompt, “Universal intercom pairing”. Then press
the Phone Button to enter into Universal Intercom Pairing mode. The
HEADSET WILL AUTOMATICALLY EXIT FROM THE CONlGURATION MENU 0LEASE
refer to section 18.1 for details on Universal Intercom.
([LW9RLFH&RQÀJXUDWLRQ0HQX
Voice Prompt
ő'ZKVEQPſIWTCVKQPŒ
Factory Default N/A
Execute Tap the Phone Button
4O EXIT VOICE CONlGURATION MENU AND GET BACK TO STANDBY MODE
rotate the Jog Dial until you hear a voice prompt saying “Exit
EQPſIWTCVKQPŒANDTAPTHE0HONE"UTTONTOCONlRM4APPINGTHE*OG
Dial is not available for this setting.