Voice
Command
Setting
30K Motorcycle Bluetooth Communication System | 83
11. Voice command
MENU
Note:
• Voice command performance may vary based
on the environmental conditions including
riding speed, helmet type and ambient noise. To
improve the performance, minimize wind noise
on the microphone by using a large microphone
sponge and closing the visor.
• To activate the voice command during intercom
conversation, tap the Ambient Mode Button
once.
11.1 Voice Command Setting (Default:
Enable)
A Voice Command setting can be found in the
settings menu, accessible through Sena Device
Manager or Sena Smartphone App.
When Voice Command is enabled, you can use
your voice to give a command the headset operate
certain operations completely handsfree. If Voice
Command is disabled, you will need to operate all
of the functions using the buttons on the headset.
To Next Page
Loading...
