eMotion in-depth guide
Clicking the ‘More’ list will provide further options:
• Save parameters as default in drone: Saves the currently-set flight pa-
rameters to the eBee’s autopilot’s memory.
• Restore factory parameters: Returns the flight parameters to their de-
fault values and automatically sends them to the drone’s autopilot.
The ‘General information’ section displays information specific to your eBee. This
includes the current firmware and bootloader versions loaded into the autopilot,
the serial numbers of the airframe and the autopilot, the total number of flights
performed by drone and the total time spent in the air.
Note: The flight counter is incremented every time the take-off pro-
cedure is initiated by shaking the eBee back and forth 3 times, even if
take-off is subsequently aborted.
Clicking ‘View flight database...’ will bring up a window that presents a summary
of all the flights performed by the drone using this computer.
119
To Next Page
Loading...
