3. Edit the message as required. (See Text entry on page 71.)
4. EITHER:
send the message immediately
save the updated message
To send the message immediately
See Sending messages below
To save the updated message
Select Options > Save.
Sending messages
You can send text (SDS) and status messages to:
the currently selected talkgroup
the default destination customised in your radio (for example, the message
sender)
a Phonebook entry
a destination you key in
Note: For setting default destination see Set default destination on page 81.
1. Choose one of the following methods:
Create a text message (described on the previous page)
Select a saved text message (see Saved messages on page 77
Select a status message from the Send Status List (see Status messages on
page 1)
2. Select Send or Options > Send.
3. Select a destination (see below):
Send to default destination
Select Send to Default then select Send. The message is sent and the radio
returns to the message screen.
Send to current talkgroup
1. Select Send to Group. The current talkgroup is shown.
2. Select Send.
User Guide
79
To Next Page
Loading...
Need help?
General
