SERVOPRO NOx Analyzers Page
The Output Settings menu is accessed by pressing from the Setup menu.
Press to see the Programmable Analogs menu, which allows the operator to view or
change the analog Output Assignments, Output Scaling or make Output Adjustments.
Press to see the Programmable Digitals menu, which allows the operator to view or
change the Digital Output Assignments, choose Output Hold or Clear, or conduct an
Output Test.
PROGRAMMABLE ANALOGS
→
→
→
→
NOTE: The Output Settings menu allows the operator to change the analyzer’s
Programmable Analog and Programmable Digital outputs to suit the operator’s needs.
NOTE: The Programmable Analogs menu provides access to the following Setup
parameters: Output Assignments, Output Scaling and Output Adjustments.
To Next Page
Loading...
