Servomex SERVOPRO - Service Menu

SERVOPRO NOx Analyzers Page
147
From the Service menu press to access the Linear Coefficients screen.
NOTES:
 Changing linear coefficients can compromise the analyzer’s accuracy and ability to
function properly.
 To reset Factory Coefficients see Reset Factory Settings.
Select the corresponding function key for the range you wish to edit. In the example, was
pressed to allow the Range 1 Linear Coefficient to be changed.
NOTE: The Linear Coefficients function allows the operator to optimize linearity by
inputting up to five coefficients for each range to generate up to a fourth-order curve.