SERVOPRO NOx Analyzers Page
To change a setting, use the Up/Down arrows to move the highlight to the setting you
wish to change. Press Enter to open the field to change the value. After making your
change, press Enter again to close the field. Press to save your changes and return to
the Setup menu.
ALARMS MENU
→ →
From the Menus screen press to access the Alarms menu.
Press to access the Current Alarms screen and view the alarms that are currently active.
NOTE: The Alarms menu allows the operator to view Current Alarms, the Alarm Log
and settable Alarm Limits.
To Next Page
Loading...
