SERVOPRO NOx Analyzers Page
Press to access the Alarm Log. The operator can view a log of the last 40 alarms.
Press to access the Alarm Limits menu. The operator can view or change the existing alarm
limits.
Press to turn ON or OFF the display of the active alarms that scroll across the bottom of the
Measure screen. The current setting is shown on the Alarms menu on the right side of the screen
after the “…”. Example: Alarm Display On/Off. . . On.
CURRENT ALARMS
→
→
→
To access the Current Alarms screen press from the Alarms menu.
Press to refresh this screen. (This screen does not auto refresh.)
NOTE: The Current Alarms screen allows the operator to view the analyzer’s current
alarms at the time this screen was accessed.
To Next Page
Loading...
