Servomex SERVOPRO - Measure Mode

SERVOPRO NOx Analyzers Page
40
MEASURE MODE
→
or
→
The Measure Mode menu is accessed by pressing the key on the Main Menu. This
menu will affect how the analyzer operates and what is displayed in the Measure screen.
Press to set the analyzer in NO only mode.
Press to set the analyzer in NO
x
only mode.
Press to set the analyzer in NO/NO
x
/NO
2
mode.
NOTE: The Measure Mode menu is used to select one of three measurement modes:
NO, NOx or NO/NOx/NO
2
.