SERVOPRO NOx Analyzers Page
USING THE KEYPAD
When the Measure screen is displayed, the ten Function keys (F1 through F10) are
shortcuts to commonly used screens. On other screens, these keys can either be used as
function keys or to enter numeric values. This is why each number key includes both the
larger Function number at the top (for example, F1) and the smaller number underneath
for numeric value (for example, 1).
The Light key is used to turn the display’s backlight on and off.
This button serves two purposes:
1. In the Number Entry (N) mode, this key is used to set a decimal in place.
2. Any other time the analyzer is in the Function mode (F) and the key is used to
return you to the measurement screen.
NOTE: An N will be displayed in the bottom-right corner of the screen when the
analyzer is in Numeric Entry mode. An F is displayed when the analyzer is being
Function
To Next Page
Loading...
