SERVOPRO NOx Analyzers Page
UNPACKING INSTRUCTIONS
Open the shipping container and carefully remove the analyzer from the packing
materials. Inspect the instrument for any sign of damage. Remove the top-cover retaining
screws. Visually check for loose parts or connectors that are not properly seated. Verify
that all circuit boards and circuit board connections are secure. If all internal components
and their alignments look correct, re-install the cover.
IMPORTANT: You should save the original shipping container your analyzer
arrives in. The shipping container and packaging are specially designed to protect the
analyzer in transport. If you ever need to return the analyzer to SERVOMEX for repair or
any other reason, the original shipping container and packaging should be used.
Reporting Damage
Should there be any apparent damage to either the inside or outside of the instrument due
to shipping or handling, immediately notify the shipping company and SERVOMEX.
The shipping container or packing materials should be retained for inspection by the
shipper.
Contact Information
http://www.servomex.com/service-network
US Technical and Service Center
4 Constitution Way
Woburn, MA 01801-1087
United States
Tel:+1 781 935 4600
USA Toll Free 1 800 433 2552
Americas_Sales@Servomex.com
Americas_Service@Servomex.com
UK Technical and Service Centre
Jarvis Brook
Crowborough
East Sussex
TN6 3FB
United Kingdom
Tel: +44 01892 652 181
Europe_Sales@Servomex.com
To Next Page
Loading...
