SERVOPRO NOx Analyzers Page
REMOTE/MANUAL
→
The Remote/Manual menu is accessed by pressing the key on the Main Menu.
The current setting (Remote Mode) is displayed in the upper right-hand corner of the
screen. Example:
SREM.
The analyzer can be controlled remotely via:
TCP/IP Modbus
RS-232 AK Protocol
Digital inputs (contact closure) located on the rear of the analyzer.
NOTE: The Remote/Manual menu gives the operator the ability to control the
instrument manually using the keypad or via a remote computer.
NOTE: AK Protocol works with both TCP/IP and Serial. Modbus only works with
To Next Page
Loading...
