SERVOPRO NOx Analyzers Page
CALIBRATION SETUP
→
→
→
To access the Calibration Setup menu, select from the Calibration menu.
All parameters on the Calibration Setup menu apply to Automated Calibration. The
following also apply to Manual Calibration: Cal Pump/Valves, Auto Cal/Check,
Deviation Limits and Analog Hold on Cal. All settings should be verified for correct
information before a manual or automated calibration is attempted.
Please note that the Calibration Setup menu shows the current settings on the right side of
the screen after the (…).
Example: Cal Pump/Valves . . . Valves.
NOTE: The Calibration Setup menu provides all the parameters necessary for
completing a successful calibration.
To Next Page
Loading...
