SERVOPRO NOx Analyzers Page
AUTO CALIBRATION SCHEDULE
→
→
→
→
In addition to the Start Time and Date, the Scheduled Calibration interval (in the
example, scheduled every 3 days) can be changed by the operator. The Auto Calibrations
screen is accessed by pressing from the Calibration Setup menu.
Use the arrow buttons
to move the highlight to changeable fields (in
the example, Start Time: 12). Press Enter to open the field and change the value.
Press Enter again to close the field after you have made your changes.
NOTE: The Auto Calibration Schedule screen allows the operator to run automated
calibrations using the analyzer’s internal clock.
To Next Page
Loading...
