SERVOPRO NOx Analyzers Page
ConvT – O
2
Converter Temperature R2NC – Range 2 not calibrated
PumpT – Pump Temperature R3NC – Range 3 not calibrated
DiodT – Diode Temperature R4NC – Range 4 not calibrated
CellT – Cell Temperature O2NC – O
2
not calibrated
DryT – Dryer Temperature Conc1 – Concentration Alarm 1
O2T – Oxygen Temperature Conc2 – Concentration Alarm 2
SEPC – Sample EPC Voltage O2ADC – O
2
ADC Alarm
AEPC – Air EPC Voltage O2Conc1 – O
2
Concentration Alarm 1
ROvr – Over Range O2Conc2 – O
2
Concentration Alarm 2
ALARM LIMITS
→
→
→
When the signals go above or lower than the assigned limit an alarm is triggered. To access the
Alarm Limits menu, press from the Alarms menu.
NOTE: The Alarm Limits menu allows the operator to view or change the current
upper and lower alarm tolerances.
To Next Page
Loading...
