SERVOPRO NOx Analyzers Page
The AK command was typed into HyperTerminal using the following keystrokes:
PRESS Ctrl B (at the same time) this will start the text.
PRESS Ctrl Spacebar (at the same time).
TYPE AKON (Function).
PRESS Spacebar
TYPE K0 (Channel #).
PRESS Spacebar
PRESS Ctrl C (at the same time) this will end the text.
INSTRUCTION COMMAND
Byte Character Explanation
1
st
Byte STX ASCII Code 02
NOTE: The analyzer will reply with numbers. If you receive ???? try the sequence
again.
To Next Page
Loading...
