SERVOPRO NOx Analyzers Page
Diagram Above
Call Outs
Description
Screen Name The name of the active screen the Analyzer is in; in this case the
Second Log On SEC appears when the Second log is enabled. See Data Logging
Time.
AK Status Line When the AK Status line is enabled, it will scroll through the
analyzer’s present state using AK Protocol. See AK Protocol.
Analyzer Mode The active mode the analyzer is in (NO, NO
x
or NO/NO
x
/NO
2
).
Measured
Concentration
The current concentration that is displayed on the screen.
Current Range The range currently being used by the analyzer. Auto Range is
indicated by an A in front of the range number.
Up and down arrows to change the analyzer’s current
range.
Range Limit The analyzer’s full-scale value of the range currently in use.
Current
Time/Active
Alarms
Scrolls between Time and Date and any active alarms.
Keypad Status Indicates how the keypad input is currently being used. F is for
functions, N is for numeric input.
Shortcut Menu: Scrollable list of shortcut functions available from the Measurement
screen.
Shortcut Tag Description
Left or right arrows are used to scroll
through the shortcut menu.
To Next Page
Loading...
