SERVOPRO NOx Analyzers Page
including not needing the high voltage required to run the PMT detector, lasts the lifetime
of the instrument, and can be exposed to ambient light during servicing with no burn
down time like a PMT detector.
Delivering excellent linear analysis from trace levels to high ppmv concentrations (0-
3ppm to 0-3,000ppm) the SERVOPRO NOx analyzer is ideal for continuous monitoring
of industrial stationary sources emissions or ambient air monitoring. Equipped with a
non-depleting photodiode to detect chemiluminescent light, the fast response time of the
analyzer also makes it a perfect solution for engine and vehicle certification testing which
requires 5 Hz data reporting.
Features
Measurement ranges from 0 – 3 ppm up to 3,000 ppm full-scale NO/NO
2
/NO
x
Automatic calibration and ranging
Fast response time without compromising the detection limits
Electronic control of sample and ozone flow to remove errors due to fluctuations
Selectable output options of current or 1, 5 or 10 VDC
Communication via RS-232, AK protocol TCP/IP and Modbus TCP/IP
CE Mark and ETL listed to UL STD 61010-1; certified to CAN/CSA C22.2 STD
61010.1
Heated Version
o EPA 40 CFR Part 1065/1066 and Euro VI HD and Euro 6 LD compliant
configuration
o Unique internal oven
To Next Page
Loading...
