Servomex SERVOPRO - Page 80

SERVOPRO NOx Analyzers Page
79
ANALOG HOLD ON CAL
→ → → →
To access the Analog HoldOon Cal menu, press from the Calibration Setup menu.
From the Analog Hold On Cal menu, press to turn Analog Hold On
 This will hold the analog outputs at the last measured value.
 Once pressed it will return to the Calibration Setup menu.
 The Calibration Setup menu shows the current setting at the bottom-right corner
of the screen after the (. . .).
 Example: Analog Hold on Cal . . . On.
From the Analog Hold On Cal menu, press to turn Analog Hold Off.
 This will allow the analog outputs to be live and reporting out values during
calibration.
 Once pressed it will return to the Calibration Setup menu.
NOTE: Analog Hold on Cal will hold the analog outputs to the last measured value
during calibration.