AR-M207 M165 M162 SIMULATIONS 7-11
08 06 Transfer charger output
When this simulation is executed, the machine shifts to the following mode select window, and the list of the
modes to be outputted is displayed.
Select an output mode with 10-key and press [OK] key or [START] key, and the transfer charger output is
made for about 30sec in the specified mode.
* The back is not displayed when DUPEX setting is OFF.
* Small size paper is Letter R (A4R) width or below. When an output is completed, the machine shifts to the
mode select window.
[CA] key: Exits the simulation mode.
[Interruption] key: Interrupts the output operation, and shifts to the sub code input window.
09 01 Duplex motor forward rotation check
Used to check the duplex motor rotation.
The duplex motor is rotated in the normal direction (paper exit direction) for 30sec.
After completion of the process, the machine shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[Interruption] key: Interrupts the output operation, and shifts to the sub code input window.
02 Duplex motor reverse rotation check
Used to check the duplex motor reverse rotation.
The duplex motor is rotated in the reverse direction for 30sec.
After completion of the process, the machine shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[Interruption] key: Interrupts the output operation, and shifts to the sub code input window.
Main
code
Sub
code
Contents Remark
Sim8-6 TC OUTPUT
1:NML_A
2:NML_B
3:SML_A
4:SML_B
5:BYPASS
2
(Mode selection window)
Sim8-6 TC OUTPUT
1:NML_A
2:NML_B
3:SML_A
4:SML_B
5:BYPASS
2
EXEC
(Execution window)
OK/START Key
EXEC
Window display Output mode
1:NML_A Normal size width (front)
2:NML_B Normal size width (back)
3:SML_A Small size width (front)
4:SML_B Small size width (back)
Sim9-1 DMF CHECK
PRESS OK KEY EXEC
Sim9-1 DMF CHECK
EXEC
OK/START Key
(Execution start window) (Execution window)
Sim9-2 DMR CHECK
PRESS OK KEY EXEC
Sim9-2 DMR CHECK
EXEC
OK/START Key
(Execution start window) (Execution window)
[07]SIMULATIONS.fm 11 ページ ２００４年１１月１７日 水曜日 午後１２時１１分
To Next Page
Loading...
