Sharp DX-2500N User Manual

1-59
BEFORE USING THE MACHINE
Contents
CLEANING THE PT CHARGER OF THE PRIMARY
TRANSFER BELT
If black lines or coloured lines appear even after you have cleaned the document glass, automatic document feeder and
the main charger, use the PT charger cleaner to clean the PT charger.
1
Open the front cover.
2
Release the lock of the toner collection
container.
Move the lock of the toner collection container to the release
position.
Release the lock of the toner collection container and let it fall
forward as far as it will go as shown in the figure.
3
Remove the toner collection container.
Hold the box by both hands and lift it up slowly.
If the toner collection container falls too far forward, it will not be
possible to remove it. (Remove the box when it is at an angle of
about 30 degrees.)
4
Clean the PT charger
(1) Slowly pull out the PT charger cleaner till a
point where it offers resistance.
(2) Slowly push the PT charger cleaner back till
the end.
(3) Repeat the steps (1) and (2) three times.

Sharp DX-2500N Specifications

General

Print Technology	Laser
Print Speed	25 ppm
Max Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Automatic Document Feeder	Yes
Duplex Printing	Yes
Interface	USB 2.0, Ethernet
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 kbps
Scan Type	Flatbed, ADF
Operating System Compatibility	Windows, Mac OS
Dimensions (W x D x H)	583 x 623 x 834 mm
Paper Size	A4, A5, B5