1-56
BEFORE USING THE MACHINE
CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM
If black lines or coloured lines appear even after you have cleaned the document glass and automatic document feeder,
use the charger cleaner to clean the main charger that charges the drum.
1
Open the front cover.
2
Release the toner collection container.
Move the lock of the toner collection container to the release
position.
Release the lock of the toner collection container and let it fall
forward as far as it will go as shown in the figure.
3
Remove the toner collection container.
Hold the box by both hands and lift it up slowly.
If the toner collection container falls too far forward, it will not be
possible to remove it. (Remove the box when it is at an angle of
about 30 degrees.)
To Next Page
Loading...
