7-29
SYSTEM SETTINGS
When User Authentication is Enabled
When "User Authentication Setting" (page 7-47) is enabled, follow the procedure below to log in.
When user authentication is by login name and password (and e-mail
address)
When auto login is enabled, the login screen will not appear.
Administrator login is performed in the user selection screen. For more information on the login procedure when user
authentication is enabled, see "USER AUTHENTICATION" (page 1-17) in "1. BEFORE USING THE MACHINE".
1
Touch the [Admin Login] key.
2
Log in.
(1) Touch the [Password] key.
Enter the administrator password in the administrator
password entry screen.
(2) Touch the [OK] key.
• If login name / password / e-mail address is selected for the authentication method, the [E-mail Address] key will
appear below the "User Name".
• For the factory default administrator password, see "TO THE ADMINISTRATOR OF THE MACHINE" in the Start
Guide.
• This completes the administrator login procedure. The system settings (administrator) can be used.
1
2
Device Account Mode User Selection
Back
12
18
6
Direct Entry
User
ABC
Admin Login
1
2
Name 1 Name 2
Name 3 Name 4
Name 5 Name 6
Name 7 Name 8
Name 9 Name 10
Name 11
Name 12
All
EFGHABCD
IJKL
MNOP QRSTU VWXYZ etc.
User Authentication
OK
Login Name
Login Locally
User Name
Administrator
Password
Auth to:
(2)
(1)
To Next Page
Loading...
Need help?
General
