Sharp DX-2500N User Manual

1-32
BEFORE USING THE MACHINE
Contents
TRAY SETTINGS FOR TRAY 1 TO 4
LOADING PAPER AND CHANGING THE PAPER SIZE
A maximum of 500 sheets of paper from size A5R to A3 (5-1/2" x 8-1/2"R to 11" x 17") can be loaded in trays 1 to 4.
1
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of paper, go
to the next step.
2
Adjust the guide plates A and B by
squeezing their lock levers and sliding
them to match the vertical and
horizontal dimensions of the paper to be
loaded.
The guide plates A and B are slidable. Slide each guide plate
while squeezing its lock lever.
3
Fan the paper.
Fan the paper well before loading it. If the paper is not fanned,
multiple sheets may feed at once and cause a misfeed.
4
Insert the paper into the tray.
Load the paper with the print side face up. The stack must not
be higher than the indicator line (maximum of 500 sheets).
A
B
Indicator
line

Sharp DX-2500N Specifications

General

Print Technology	Laser
Print Speed	25 ppm
Max Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Automatic Document Feeder	Yes
Duplex Printing	Yes
Interface	USB 2.0, Ethernet
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 kbps
Scan Type	Flatbed, ADF
Operating System Compatibility	Windows, Mac OS
Dimensions (W x D x H)	583 x 623 x 834 mm
Paper Size	A4, A5, B5