1-44
BEFORE USING THE MACHINE
This section describes the peripheral devices that can be used with the machine and explains how to use the finisher, as
well as Sharp OSA (application communication module and external account module).
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
(As of Nov, 2014)
PERIPHERAL DEVICES
Product name Product number Description
Reversing single pass feeder MX-RP18
This automatically turns the original over to enable scanning of
both sides. (DX-2000U only) When DX-2500N is used, the
reversing single pass feeder is a standard equipment.
Document cover MX-VR12 This holds down the original. (DX-2000U only)
Stand/1x500 sheet paper drawer MX-DE12
Additional tray. A maximum 500 sheets of paper can be loaded
in each tray.
Stand/2x500 sheet paper drawer MX-DE13
Stand/3x500 sheet paper drawer MX-DE14
Stand/500&2000 sheet paper
drawer
MX-DE20
Additional paper trays. Tray 2 can hold a maximum of 500
sheets of paper, tray 3 can hold a maximum of 1150 sheets, and
tray 4 can hold a maximum of 850 sheets.
Long paper feeding tray MX-LT10 Long paper with a size up to 1200 mm can be loaded.
Finisher MX-FN17
Output device that enables the use of the staple function and
offset function. (DX-2500N only)
Punch module
MX-PN11A
MX-PN11B
MX-PN11C
MX-PN11D
Punches holes in copies and other output. Requires a finisher.
(DX-2500N only)
Barcode font kit MX-PF10 Adds barcode fonts to the machine.
Printer expansion kit MX-PB17 Adds a PCL printer function. (DX-2000U only)
PS3 expansion kit MX-PK11
Enables the machine to be used as a Postscript compatible
printer.
Internet fax expansion kit MX-FWX1 Enables Internet Fax.
Facsimile expansion kit MX-FX11 Adds a fax function.
Application integration module MX-AMX1
The application integration module can be combined with the
network scanner function to append a metadata file to a scanned
image file.
Application communication module MX-AMX2
This allows the machine to be linked over a network to an
external software application.
External account module MX-AMX3
This is required to use an external account application on the
machine.
To Next Page
Loading...
