Sharp DX-2500N User Manual

2-37
COPIER
Contents
Punch function
If an optional punch module is installed, holes can be punched in output.
Paper size that can be punched is B5R to A3 (7-1/4" x 10-1/2"R to 11" x 17"). However, A3W (12" x 18") sized paper
and special media such as transparency film and tab paper cannot be used.
Original placement orientation (for the staple sort and punch functions)
When using the staple sort function or the punch function, the original must be placed as shown below to enable stapling
or punching in the desired position on the paper.
Staple sort Punch
Document feeder tray Document glass Document feeder tray Document glass
One staple (top)
Two staples
One staple (bottom)
[Original 1] [Punch positions]
[Examples]
[Original 2] [Punch positions]
abc
abc
abc
abc
abc
abc
abc
abc
abc
abc

Sharp DX-2500N Specifications

General

Print Technology	Laser
Print Speed	25 ppm
Max Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Automatic Document Feeder	Yes
Duplex Printing	Yes
Interface	USB 2.0, Ethernet
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 kbps
Scan Type	Flatbed, ADF
Operating System Compatibility	Windows, Mac OS
Dimensions (W x D x H)	583 x 623 x 834 mm
Paper Size	A4, A5, B5