Sharp DX-2500N User Manual

2-130
COPIER
Contents
4
After scanning is finished, check the
number of sheets that were scanned and
touch the [OK] key.
Copying will begin.
• When job build mode is used, the number of scanned sheets
appears when the [Read-End] key is touched.
• The number that is displayed is the number of scanned
original sheets, not the number of scanned original pages.
For example, when two-sided copying is performed using
one original, the number "1" will appear to indicate that one
original sheet was scanned, not "2" to indicate the front-side
page and the reverse side page.
If the displayed number of original sheets is different from the actual number of original sheets...
Press the [STOP] key ( ).
To cancel the original count mode setting...
Touch the [Original Count] key in the screen of step 2 so that it is not highlighted.
OKCancel
130 pages of original
have been scanned.
Copy the scanned data?

Sharp DX-2500N Specifications

General

Print Technology	Laser
Print Speed	25 ppm
Max Print Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Copy Speed	25 cpm
Automatic Document Feeder	Yes
Duplex Printing	Yes
Interface	USB 2.0, Ethernet
Functions	Print, Copy, Scan, Fax
Fax Transmission Speed	33.6 kbps
Scan Type	Flatbed, ADF
Operating System Compatibility	Windows, Mac OS
Dimensions (W x D x H)	583 x 623 x 834 mm
Paper Size	A4, A5, B5