Sharp LC-32LB261U User Manual

30
LC-32LB261U Sharp 32" LED TV
Connecting a USB flash drive
1 Plug a USB flash drive into the USB port on the side of your TV.
2 If your TV is turned on when you connect the USB flash drive, press
S or T to select Ye s in the message that appears,
then press ENTER. The Photos menu opens.
OR
If you switch to a different video input source after you plug in the USB flash drive and want to switch back to the drive,
press INPUT to open the INPUT SOURCE list, press
S or T to select USB (Photos), then press ENTER. The Photos menu
opens.
Caution
Do not remove the USB flash drive or turn off the TV while using the USB
flash drive. You may lose data or damage the USB flash drive.
Note
The PHOTOS viewer only supports JPEG format images (with “.jpg” file
extensions) and not all JPEG files are compatible with your TV.
For more information, see “Using a USB flash drive” on page 48.
USB flash drive
Side of TV

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds