Sharp LC-32LB261U User Manual

52
LC-32LB261U Sharp 32" LED TV
Setting the power on picture mode
You can set the picture mode your TV uses when you turn it on.
1 Press MENU.
2 Press
W or X to highlight Help,
then press ENTER.
3 Press
S or T to highlight Power on in Dynamic Mode,
then press ENTER or X to access the option.
4 Press
W or X to select On (when you turn on your TV, it will
be in Dynamic picture mode) or Off (when you turn on
your TV, it will be in the picture mode it was in before you
turned it off), then press ENTER.
5 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Adjusting the computer image
When you connect a computer to your TV using the PC IN jack,
you may need to adjust the computer image to improve the
quality.
1 Press INPUT, press
S or T to highlight PC, then press
ENTER.
2 Press MENU.
3 Press
W or X to highlight
Settings, then press ENTER.
Note
The PC option is only available when a
computer is connected to the PC IN jack
on the back of your TV.

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds