53
LC-32LB261U Sharp 32" LED TV
4 Press S or T to highlight PC,
then press ENTER.
5 Press
S or T to highlight an option, then press ENTER or X
to access the option. You can select:
• Auto Adjust—Automatically adjusts the image settings
such as position and phase.
• H. Position—Moves the image right or left.
• V. Position—Moves the image up or down.
• Clock—Minimizes vertical stripes in the screen image.
• Phase—Adjusts the focus of stable images.
• Reset PC Settings—Resets all computer settings to
factory mode.
6 Press
W or X to adjust the option.
7 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Adjusting the sound
Adjusting sound settings
You can adjust sound settings to improve the sound quality.
You also can reset all sound settings to the factory default.
1 Press MENU,
2 Press
W or X to highlight
Sound, then press ENTER.
3 Press
S or T to highlight an option, then press ENTER or X
to access the option. You can select:
• Sound Mode—Selects the sound mode. You can select:
• Standard—Balances treble and bass. This setting is
good for watching standard TV broadcasts.
• Movie—Enhances treble and bass for a rich sound
experience. This setting is good for watching DVDs,
Blu-ray Discs, and HDTV.
• Music—Preserves the original sound. This setting is
good for listening to music.
• Voice—Enhances vocals for TV audio. This setting is
good for watching news broadcasts.
• User—Lets you manually adjust sound settings.
• Balance—Adjusts the balance between the left and right
audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• Speaker—Selects where to play TV audio. When you
connect headphones to your TV, audio plays through
both the headphones and the TV speakers. You can select:
• Auto (default setting)—Automatically turns off the TV
speakers when you connect a device to the /AUDIO
OUT jack. When the device is disconnected, the TV
speakers turn on automatically.
• On—Always plays the audio through the TV speakers. If
a device is connected to the /AUDIO OUT jack, the
audio is played through both the TV speakers and the
device.
• Off—Turns off the TV speakers and plays the audio only
through the device connected to the /AUDIO OUT
jack. If you disconnect the device, the TV speakers
remain turned off.
To Next Page
Loading...
Need help?
General
