Sharp LC-32LB261U User Manual

56
LC-32LB261U Sharp 32" LED TV
4 Press S or T to highlight Cable/Satellite Box, Cable from
the wall, or Antenna, then press ENTER.
A If you select Cable/Satellite Box, a screen opens to
show the ways you can connect a cable or satellite
box.
Press ENTER. A message tells you that setup is
complete. Press ENTER to close the menu.
B If you select Cable from the wall, your TV scans for
channels. The scan may take several minutes. When
a message tells you that setup is complete, press
ENTER to close the menu.
C If you select Antenna, your TV scans for available
channels. The scan may take several minutes. When
a message tells you that setup is complete, press
ENTER to close the menu.
Hiding channels
You can hide channels in the channel list. When you press
CH or CH , your TV skips the hidden channels. You can
still tune to a hidden channel by pressing the number buttons
for the channel.
1 Press MENU.
2 Press
W or X to highlight
Channels, then press ENTER.
3 Press
S or T to highlight Channel Skip, then press ENTER
or X to access the option.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds