Sharp LC-32LB261U User Manual

33
LC-32LB261U Sharp 32" LED TV
Analog audio
When you connect external speakers or a sound bar to the /AUDIO OUT jack, the TV speakers are muted.
1 Make sure that your TV’s power cord is unplugged and the external speaker system or sound bar is turned off.
2 Connect an audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the AUDIO IN jacks on
the external speaker system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the external speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the external speaker system or sound bar.
Notes
• For information about selecting the audio out mode for an external
speaker system or sound bar, see the Headphones/Audio Out option in
“Adjusting sound settings” on page 53.
• You can connect headphones to the /AUDIO OUT jack. If you want to
use headphones, you need to disconnect the external speaker system or
sound bar.
Audio cable
External speaker
system
Side of TV
Audio cable
connector
/AUDIO OUT
jack
On your TV
Sound bar

Sharp LC-32LB261U Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Screen Size	31.5 inches, 32 inches
Refresh Rate	60hz
Brightness	180 candela per square meter
Speakers Output	10 watts
USB Ports	1
RF Antenna	yes
Headphones Output	yes
Digital Optical Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	1
3D	no
Power Consumption	81 kilowatt hours
Depth with Stand	6.5 inches
Height with Stand	18.38 inches
Width with Stand	28.63 inches
Net Weight with Stand	11.3 pounds
Depth without Stand	2.5 inches
Height without Stand	17.13 inches
Net Weight without Stand	10.6 pounds