EasyManuals Logo

Sharp LC-32LB261U User Manual

Sharp LC-32LB261U
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
72
LC-32LB261U Sharp 32" LED TV
Dark, poor, or no
picture (screen is
lit), but sound is
good.
Try another channel. The station
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on page 13
or “Connecting an antenna or
cable TV (no box)” on page 18.
Adjust the brightness. See
Adjusting the TV picture” on
page 50.
Make sure that the correct picture
mode is selected. See “Adjusting
the TV picture” on page 50.
If you are using an antenna, the
digital channel signal may be low.
To check the digital channel
signal strength, see “Checking
the digital signal strength” on
page 59.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Make sure that the video cables
are connected securely to your
TV.
The video cable(s) you are using
may be bad. Try a new set.
Try another channel. The station
may be experiencing problems.
No color, dark
picture, or color is
not correct.
Try another channel. The station
may be experiencing problems.
Adjust the color settings. See
Adjusting the TV picture” on
page 50.
Make sure that the video cables
are connected correctly and
securely to your TV.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on page 13
or “Connecting an antenna or
cable TV (no box)” on page 18.
If you are using an antenna, the
digital channel signal may be low.
To check the digital channel
signal strength, see “Checking
the digital signal strength” on
page 59.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Problem Solution
Only snow (noise)
appears on the
screen.
Try another channel. The station
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on page 13
or “Connecting an antenna or
cable TV (no box)” on page 18.
If you are using an antenna, the
digital channel signal may be low.
To check the digital channel
signal strength, see “Checking
the digital signal strength” on
page 59.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Picture quality is
good on some
channels and poor
on others. Sound
is good.
The problem may be caused by a
poor or weak signal from the
broadcaster or cable TV provider.
If you connect to cable or satellite
TV without a set-top box and
experience poor picture quality,
you may need to install a set-top
box to improve signal reception
and picture quality. Contact your
cable or satellite TV provider
about upgrading to a set-top box.
Problem Solution

Table of Contents

Other manuals for Sharp LC-32LB261U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-32LB261U and is the answer not in the manual?

Sharp LC-32LB261U Specifications

General IconGeneral
Screen Typeled
Wall Mount100mm x 100mm
Screen Size31.5 inches, 32 inches
Refresh Rate60hz
Brightness180 candela per square meter
Speakers Output10 watts
USB Ports1
RF Antennayes
Headphones Outputyes
Digital Optical Audio Outputs1
Component Video Inputs1
Composite Video Inputs1
DVI1
3Dno
Power Consumption81 kilowatt hours
Depth with Stand6.5 inches
Height with Stand18.38 inches
Width with Stand28.63 inches
Net Weight with Stand11.3 pounds
Depth without Stand2.5 inches
Height without Stand17.13 inches
Net Weight without Stand10.6 pounds

Related product manuals