Sharp MX-5000N - Page 263

MX-5001N SIMULATION 6 – 116
<Small size, Large size>
Small size: The paper length in the transport direction is shorter
than the LT size (216mm).
Large size: The paper length in the transport direction is longer
than the LT size (216mm).
When the adjustment value is increased, the warp amount is
increased. When the adjustment value is decreased, the warp
amount is decreased.
(When the adjustment value is changed by 1, the stop timing is
changed by 0.1mm.)
53
53-6
Purpose
Adjustment
Function (Purpose)
Used to adjust the detection level of the
RSPF/DSPF document width.
Section
Operation/Procedure
1) Open the RSPF paper feed guide to the maximum width.
2) Press [EXECUTE] key.
The maximum width detection level is recognized.
3) Open the RSPF (or DSPF) paper feed guide to the A4R width.
4) Press [EXECUTE] key.
The A4R width detection level is recognized.
5) Open the RSPF (or DSPF) paper feed guide to the A5R width.
6) Press [EXECUTE] key.
The A5R width detection level is recognized.
7) Open the RSPF (or DSPF) paper feed guide to the minimum
width.
8) Press [EXECUTE] key.
The minimum width detection level is recognized.
A ENGINE TRAY1(S) Main unit cassette 1 (Upper stage)/deflection
adjustment value (Plain paper/Small size)
LT size (216mm) or less 1 - 99 40 60
B TRAY1(L) Main unit cassette 1 (Upper stage)/deflection
adjustment value (Plain paper/Large size)
LT size (216mm) or above 1 - 99 40
60
C TRAY1 HEAVY PAPER(S) Main unit cassette 1 (Upper stage)/deflection
adjustment value (Heavy paper/Small size)
LT size (216mm) or less 1 - 99 40
50
D TRAY1 HEAVY PAPER(L) Main unit cassette 1 (Upper stage)/deflection
adjustment value (Heavy paper/Large size)
LT size (216mm) or above 1 - 99 40
50
E TRAY2(S) Main unit cassette 2 (Lower stage)/deflection
adjustment value (Plain paper/Small size)
LT size (216mm) or less 1 - 99 40
60
F TRAY2(L) Main unit cassette 2 (Lower stage)/deflection
adjustment value (Plain paper/Large size)
LT size (216mm) or above 1 - 99 40
60
G TRAY2 HEAVY PAPER(S) Main unit cassette 2 (Upper stage)/deflection
adjustment value (Heavy paper/Small size)
LT size (216mm) or less 1 - 99 40
50
H TRAY2 HEAVY PAPER(L) Main unit cassette 2 (Upper stage)/deflection
adjustment value (Heavy paper/Large size)
LT size (216mm) or above 1 - 99 40
50
I MANUAL PLAIN PAPER(S) Manual feed tray/deflection adjustment value
(Plain paper/Small size)
LT size (216mm) or less 1 - 99 40
60
J MANUAL PLAIN PAPER(L) Manual feed tray/deflection adjustment value
(Plain paper/Large size)
LT size (216mm) or above 1 - 99 40
60
K MANUAL HEAVY PAPER(S) Manual feed tray/deflection adjustment value
(Heavy paper/Small size)
LT size (216mm) or less 1 - 99 40
50
L MANUAL HEAVY PAPER(L) Manual feed tray/deflection adjustment value
(Heavy paper/Large size)
LT size (216mm) or above 1 - 99 40
50
M MANUAL OHP Manual feed tray/deflection adjustment value
(OHP)
- 1 - 99 40
50
N MANUAL ENV Manual feed tray/deflection adjustment value
(Envelope)
- 1 - 99 40
50
O ADU PLAIN PAPER(S) ADU/deflection adjustment value
(Plain paper/Small size)
LT size (216mm) or less 1 - 99 40
60
P ADU PLAIN PAPER(L) ADU/deflection adjustment value
(Plain paper/Large size)
LT size (216mm) or above 1 - 99 40
60
Q ADU HEAVY PAPER(S) ADU/deflection adjustment value
(Heavy paper/Small size)
LT size (216mm) or less 1 - 99 40
50
R ADU HEAVY PAPER(L) ADU/deflection adjustment value
(Heavy paper/Large size)
LT size (216mm) or above 1 - 99 40
50
S DESK(S) DESK/deflection adjustment value
(Plain paper/Small size)
LT size (216mm) or less 1 - 99 40
60
T DESK(L) DESK/deflection adjustment value
(Plain paper/Large size)
LT size (216mm) or above 1 - 99 40
60
U DESK HEAVY PAPER(S) DESK/deflection adjustment value
(Heavy paper/Small size)
LT size (216mm) or less 1 - 99 40
50
V DESK HEAVY PAPER(L) DESK/deflection adjustment value
(Heavy paper/Large size)
LT size (216mm) or above 1 - 99 40
50
W A4LCC A4LCC/deflection adjustment value - 1 - 99 40
60
Display/Item Content
Setting
range
Default value
41-sheet
machine
50-sheet
machine
1
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
5(*,6752//(5$'-8670(17



$˖
˷˹
˖1250$/B3/$,1B+,*+
$˖
˖1250$/B3/$,1B/2:
%˖
˖1250$/B7+,1B+,*+
&˖
˖1250$/B7+,1B/2:
'˖
˖5$1'20B3/$,1B/2:
)˖
˖5$1'20B3/$,1B+,*+
(˖
˖5$1'20B7+,1B+,*+
*˖ǂ
˖5$1'20B7+,1B/2:
+˖ǂ
2.
5(*,5(*, (1*,1(
: Oct. 24 2008
1