MX-5001N RSPF SECTION D – 12
(3) SPF paper feed reverse motor
1) Remove the front cabinet and the rear cabinet.
2) Remove the transport unit.
3) Remove the document tray unit.
4) Remove the drive unit.
5) Remove the SPF paper feed reverse motor.
(4) SPF transport motor
1) Remove the front cabinet and the rear cabinet.
2) Remove the transport unit.
3) Remove the document tray unit.
4) Remove the drive unit.
5) Loosen the screw of the tension holder to reduce the tension of
the belt. Remove the SPF transport motor.
F. Base tray section
(1) RSPF drive PWB
1) Remove the rear cabinet.
2) Remove the RSPF drive PWB.
1
2
2
Parts
a RSPF drive PWB
a
To Next Page
Loading...
