MX-5001N RSPF SECTION D – 11
D. Reversing section
(1) Document paper exit gate solenoid
1) Remove the front cabinet and the rear cabinet.
2) Remove the transport unit.
3) Remove the solenoid adjustment plate. Remove the SPF doc-
ument paper exit gate solenoid.
* When installing, insert the pin of the SPF document paper
exit gate solenoid into the gate.
E. Drive unit
1) Remove the front cabinet and the rear cabinet.
2) Remove the transport unit.
3) Remove the document tray unit.
4) Remove the resin E-ring and the bearing. Remove the drive
unit, and remove each part.
(1) SPF paper feed clutch
1) Remove the rear cabinet.
2) Remove the E-ring, and remove the SPF paper feed clutch.
(2) SPF resist roller clutch
1) Remove the front cabinet and the rear cabinet.
2) Remove the transport unit.
3) Remove the E-ring, and remove the SPF resist roller clutch.
Parts
a Document paper exit gate solenoid
Parts
a SPF paper feed clutch
b SPF resist roller clutch
c SPF paper feed reverse motor
d SPF transport motor
a
1
2
a
c
d
b
To Next Page
Loading...
