Sharp MX-5000N

MX-5001N MAINTENANCE 8 – 3
Transfer
section
Secondary transfer
backup blade
Mechanical
parts
- ✕✕✕✕✕✕✕✕✕✕✕
PTC unit - ✕ S ✕ S ✕ S ✕ S ✕ S ✕ (P/G No.: [20]-502)
Pro-reg sensor - {{{{{{ {{{{{
Transfer cleaner seal
F/R
- ✕✕✕✕✕✕✕✕✕✕✕
Primary transfer toner
reception seal
- ✕✕✕✕✕✕✕✕✕✕✕
Filters Ozone filter Mechanical
parts
✕ SSSSSSSSSSS(P/G No.: [47]-40)
Left cabinet filter ✕ {{{{{{ {{{{{
Paper feed
section
Pickup roller Mechanical
parts
✕ {{{{{{ {{{{{Replace as
needed.
Reference:
About 100k
Paper feed roller ✕ {{{{{{ {{{{{
Separation roller ✕ {{{{{{ {{{{{
Torque limiter ✕ ✕✕✕✕✕✕✕✕✕✕✕
Transport,
Reverse,
Paper exit
section
PS follower roller Mechanical
parts
✕ {{{{{{ {{{{{
Transport rollers ✕ {{{{{{ {{{{{
Transport paper
guides
{ {{{{{{ {{{{{
Discharge brush ✕ ✕✕✕✕✕✕✕✕✕✕✕
Gears ✕ ✕✕✕✕✕✕✕✕✕✕✕
Paper dust removing
unit
{ SSSSSSSSSSS(P/G No.: [25]-58)
Drive
section
Gears (Grease) Mechanical
parts
- ✕✕✕✕✕✕✕✕✕✕✕
Shaft earth sections
(Conduction grease)
- ✕✕✕✕✕✕✕✕✕✕✕
Belts - ✕✕✕✕✕✕✕✕✕✕✕
Sensors ✕ ✕✕✕✕✕✕✕✕✕✕✕
Scanner
section
Mirror/Lens/Reflector/
CCD
Mechanical
parts
{ {{{{{{ {{{{{
Table glass/SPF glass { {{{{{{ {{{{{
Scanner lamp { {{{{{{ {{{{{
Rails ✩ ✩✩✩✩✩✩✩✩✩✩✩
Drive belt/drive wire ✕ ✕✕✕✕✕✕✕✕✕✕✕
RSPF
section
Paper feed roller Mechanical
parts
{ {{{{{{ {{{{{Replace as
needed.
Reference:
About 100k
Pickup roller { {{{{{{ {{{{{
Separation roller { {{{{{{ {{{{{
Transport rollers { {{{{{{ {{{{{
Torque limiter ✕ ✕✕✕✕✕✕✕✕✕✕✕
Discharge brush
✕ ✕✕✕✕✕✕✕✕✕✕✕
Gears ✕ ✕✕✕✕✕✕✕✕✕✕✕
Belts ✕ ✕✕✕✕✕✕✕✕✕✕✕
DSPF
section
Paper feed roller Mechanical
parts
{ {{{{{{ {{{{{Replace as
needed.
Reference:
About 100k
Pickup roller { {{{{{{ {{{{{
Separation roller { {{{{{{ {{{{{
Transport rollers { {{{{{{ {{{{{
Discharge brush ✕ ✕✕✕✕✕✕✕✕✕✕✕
Torque limiter ✕ ✕✕✕✕✕✕✕✕✕✕✕
No. 1 scanning plate { {{{{{{ {{{{{
No. 2 scanning
section, scanning
glass
{ {{{{{{ {{{{{
No. 2 scanning
section, white
reference glass
{ {{{{{{ {{{{{
Mirror { {{{{{{ {{{{{
Lens/CCD { {{{{{{ {{{{{
Copy lamp/Reflector { {{{{{{ {{{{{
OC mat { {{{{{{ {{{{{
Gears (Grease) ✕ ✕✕✕✕✕✕✕✕✕✕✕
Belts - ✕✕✕✕✕✕✕✕✕✕✕
Section Part name
When
calling
150
k
300
k
450
k
600
k
750
k
900
k
1050
k
1200
k
1350
k
1500
k
1650
k
Remark/Refer to
the Parts Guide.
Block/Item No.
(Only the
replacement parts
are described.)
1
: Oct. 24 2008
1