MX-5001N MAINTENANCE 8 – 8
16) Remove the side seal F/R.
Maintenance: Check at every 100K (color) or every 150K
(monochrome). (Replace as necessary.)
* When attaching, use alcohol to remove oil from the attached
surface, and fit as indicated below.
17) Remove the screw, and remove the DC holding plate and the
DCH lens.
18) Remove the screws, and remove the cleaner blade.
Maintenance: Replace at every 100K (color) or every 150K
(monochrome).
0㨪0.3mm
0㨪0.3mm
0㨪0.3mm
0㨪0.3mm
To Next Page
Loading...
