MX-5001N PAPER FEED SECTION F – 2
Signal name Name Function/Operation
CPFM Paper feed motor Drives the paper feed section.
MPED Manual feed paper empty detection Manual feed paper empty detection
MPFD Manual feed paper entry detection Manual feed paper entry detection
MPDS Paper pickup solenoid Paper pickup solenoid (Manual paper feed)
MPGS Manual paper feed gate solenoid Controls open/close of the manual paper feed gate solenoid.
MPLD Manual paper feed length detector Detects the manual paper feed tray paper length.
MPUC Manual paper feed clutch Controls ON/OFF of the paper feed roller in the manual paper feed section.
MPWD Manual paper feed tray paper width
detector
Detects the manual paper feed tray paper width.
MTOP1 Manual paper feed tray pull-out position
detector 1
Manual paper feed tray paper pull-out position detection (Storing position)
MTOP2 Manual paper feed tray pull-out position
detector 2
Manual paper feed tray paper pull-out position detection (Pulling out position)
HPFM Horizontal transport motor Transports paper from the paper feed section to the transport motor drive system.
Transports paper from the right door section to the transport motor drive system.
TH_M/HUD_M Temperature/humidity detection Detects temperature and humidity.
No. Name Function/Operation
1 Paper feed roller
(Manual paper feed tray)
Feeds paper to the paper transport section.
2 Separation roller
(Manual paper feed tray)
Separates paper to prevent double feed.
3 Paper pickup roller
(Manual paper feed tray)
Sends paper to the paper transport section.
4 Torque limiter A certain level of resistance force is supplied to the rotation of the separation roller to
prevent double feed.
5 Transport roller 12 (Drive) Transports paper from the transport roller 11 to the transport roller 8. /
Transports paper from the manual paper feed tray to the transport roller 8.
To Next Page
Loading...
