MX-5001N DUPLEX/PAPER EXIT SECTION N – 2
Signal name Name Function/Operation
ADUGS ADU gate solenoid Controls the ADU gate.
ADUM-H ADU motor upper Drive the transport roller 13.
ADUM-L ADU motor lower Drives the right door section.
APPD1 ADU transport path detection 1 Detects paper pass in the upstream of the duplex (ADU).
APPD2 ADU transport path detection 2 Detects paper pass in the midstream of the duplex (ADU).
DSW_ADU ADU transport open/close detection Duplex (ADU) cover open/close detection
POD3 Right tray paper exit detection Detects the paper exit into the right tray.
TFD3 Detects the right tray paper exit full. Detects the right tray paper exit full.
No. Name Function/Operation
1 Transport roller 10 (Drive) Transports the paper transported from the transport roller 13 to the transport roller 11.
2 Transport roller 11 (Drive) Transports the paper transported from the transport roller 10 to the transport roller 12.
3 Paper exit roller 2 (Drive) Used to discharge paper.
4 Right paper exit gate Selects the paper path to transport paper to the duplex (ADU) section or to discharge paper to
the right tray.
5 Transport roller 13 (Drive) Transports paper from the paper exit roller 1 to the paper exit roller 2. Transports paper to the
duplex (ADU) section.
To Next Page
Loading...
