Sharp MX-5000N

MX-5001N DUPLEX/PAPER EXIT SECTION N – 7
4) Remove the screws, and remove the shifter motor.
c. Fusing web cleaning motor
1) Remove the paper exit unit.
2) Remove the exhaust fan duct.
3) Disconnect the connector, and remove the screws, and then
remove the fusing web cleaning motor.
d. Fusing drive motor
1) Remove the paper exit unit.
2) Disconnect the connector, and remove the screws, and then
remove the fusing drive motor.
e. Paper exit drive motor
f. ADU motor upper
1) Remove the paper exit unit.
2) Disconnect the connector, and remove the screws, and
remove the paper exit drive motor (A), and the ADU motor
upper (B).
* Be careful to install the motors in the proper direction.
* When installing, attach the belt as shown below.
A
A
B
B