Sharp MX-7090N - Page 609

7-12
SYSTEM SETTINGS►SETTING MODE LIST
 Network Port Emulation Switching Auto No Yes
 Port Switching Method Switch at End of Job No Yes
 Initial Status Settings Yes Yes
 Copies 1 Yes Yes
 Orientation Portrait Yes Yes
 Paper Size Letter (8-1/2" x 11") Yes Yes
 Output Tray Auto Yes Yes
 Paper Type Plain Paper 1 Yes Yes
 Resolution Setting 600dpi (High Quality) Yes Yes
 Disable Blank Page Print Disabled Yes Yes
 2-Sided Print 1-Sided Yes Yes
 Color Mode Auto Yes Yes
 N-Up 1-Up Yes Yes
 Fit To Page Enabled Yes Yes
 Output Varies depending on the machine
configuration
Yes Yes
• Print per Unit Enabled Yes Yes
• Separator Page Yes Yes
- Insert Before Job Disabled Yes Yes
- Insert After Job Disabled Yes Yes
•Staple Sort*
1
Disabled Yes Yes
• Punch*
2
Disabled Yes Yes
• Fold*
3, *4
Varies depending on the machine
configuration
Yes Yes
• Saddle Fold*
3
Yes Yes
-Print Side Inside Yes Yes
- Fold Multiple Sheets Together Disabled Yes Yes
• Paper Size for Z-Fold
*4
All Enabled Yes Yes
•C-Fold
*4
Print Side: Inside
Fold Orientation: Open Right
Yes Yes
• Accordion Fold
*4
Fold Orientation: Open Right Yes Yes
• Double Fold
*4
Print Side: Inside
Fold Orientation: Open Right
Yes Yes
•Half Fold
*4
Print Side: Inside Yes Yes
• Trimming Width Settings
*5
Yes Yes
- Adjust Trimming Width 2.0 mm Yes Yes
 Quick File Disabled Yes Yes
Setup Items Factory default setting U A